If your QNAP device has failed due to a faulty hard drive (flashing red LED), the RAID has failed or become corrupt, a power surge damaged the unit, or you simply cannot access it due to any other failure, our engineers recover and restore corrupt and missing data from all storage devices and NAS boxes.
Retrodata’s engineers have some of the most advanced RAID data recovery and engineering techniques in the industry, and consistently, successfully recover data that has been considered not recoverable by other recovery providers.
They will advise you what you should do next to prevent further data loss. They will also discuss with you what is required to recover your data, and how to get the process started. They recover data from any failure, including:
RAID expansion failed
RAID migration failed
Corrupt file system or RAID
Cannot access the device or share
Corrupt volume
Our engineers work with all RAID levels, and all operating systems. They have extensive experience of all file systems – even those systems that are proprietary to the manufacturer of the device. They will step in and recover your system, restore all the missing data, and get you back up and running again. Quickly and efficiently.
Why use Retrodata? • RAID Recovery • Emergency Recovery • Why RAID fails
Recovering QNAP RAID failures.
QNAP SS 439 Pro
Four 2.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6, RAID 5 and hot spare, and others
Active Directory support
Online RAID level migration
Online RAID capacity expansion
LED flashing red indicates drive or raid rebuild failed
Hard disk failed – flashing red LED
QNAP SS 839 Pro Turbo
Eight 2.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6, RAID 5 and hot spare, and others
Active Directory support
Online RAID level migration
Online RAID capacity expansion
LED flashing red indicates failed drive or raid rebuild failure
QNAP TS 809U RP
2U Rackmount
Eight 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
Online RAID level migration failed
Online RAID capacity expansion failed
LED flashing red indicates failed drive or raid rebuild failure
Corrupted RAID – blinking red LED
QNAP TS 809 Pro Turbo
Eight 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
Online RAID level migration
Online RAID capacity expansion
Blinking red led light indicates crashed disk drive or raid rebuild failure
QNAP TS 859 Pro Turbo
Eight 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
Online RAID level migration
Online RAID capacity expansion
LED flashing red indicates failed drive or raid rebuild failure
QNAP TS 659 Pro Turbo
Six 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
Online RAID level migration
Online RAID capacity expansion
LED flashing red indicates failed drive or raid rebuild failure
QNAP TS 559 Pro Turbo
Five 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
Online RAID level migration
Online RAID capacity expansion
LED flashing red indicates failed drive or raid rebuild failure
QNAP TS 459 Pro Turbo
Four 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
Online RAID level migration
Online RAID capacity expansion
LED flashing red indicates failed drive or raid rebuild failure
QNAP TS 459U Turbo
Four 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
VMWare and Virtualization
Virtual Machine
LED flashing red indicates failed drive or raid rebuild failure
QNAP TS 259 Pro Turbo
Two 3.5″ drives
RAID 0, RAID 1
LED flashing red indicates failed drive or crashed raid rebuild failure
Cannot access the drive – crashed drive
QNAP TS 439 Pro 2 Turbo
Four 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
LED flashing red indicates failed drive or raid rebuild failure
Cannot access the volume
QNAP TS 239 Pro 2 Turbo
Two 3.5″ drives
RAID 0, RAID 1
VMWare ready, virtualisation
LED flashing red indicates failed drive or raid rebuild failure
QNAP TS 639 Pro Turbo
Six 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
LED flashing red indicates failed drive or raid rebuild failure
QNAP TS 509 Pro Turbo
Five 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
LED flashing red indicates failed drive or raid rebuild failure
Cannot see share
QNAP TS 439 Pro 2 Turbo
Four 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
LED flashing red indicates failed drive or raid rebuild failure
QNAP TS 439U Pro Turbo
Four 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
LED flashing red indicates failed drive or raid rebuild failure
QNAP TS 419U Pro Turbo
Rackmount
Four 2.5″ or 3.5″ drives
RAID 0, RAID 1
LED light blinking red indicates failed drive or raid rebuild failure
QNAP TS 410U Turbo
Rackmount
Four 2.5″ or 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
LED blinking red indicates failed drive or raid rebuild failure
Failed disk drive – will not boot
QNAP TS 419P Turbo
Four 2.5″ or 3.5″ drives
RAID 0, RAID 1, RAID 5, RAID 6 and others
Other QNAP Storage devices
QNAP TS 410 Turbo
QNAP TS 219P Turbo
QNAP TS 219 Turbo
QNAP TS 119 Turbo
QNAP TS 210 Turbo
QNAP TS 119 Turbo
QNAP TS 110 Turbo
What we do
Recover crashed QNAP
Recover corrupted RAID
Recover deleted data
Deleted file recovery
Restore crashed RAID
Recovering failed QNAP disks
QNAP file recovery
Recover QNAP volume
